ALL PROJECTS

ALL
Bank
Commercial
Education
Fitness Center
Lobby
Medical Facilities
Museum
Office Space
Residential
Restaurant
#147 | 2016
LARSSON & JENNINGS
Project Description

Denair executed the full scope of mechanical work in this project, which involved: supplying and installation of ducted ceiling concealed and wall mounted AC units of 18,000 BTU each; fabrication and installation of supply and return ductwork; supply and installation of supply and return floor mounted diffusers with associated plenum boxes; supply and installation of drip pans with leak detectors, refrigerant and condensate piping, condensate pumps and thermostats with associated control wiring. The project was completed by Denair HVAC NYC in according to schedule.

#145 |
100 William Str. 17th Fl.
Project Description
#143 | 2016
Global Fertility
Project Description

Denair carried out the HVAC part of this sizable project. Denair performed demolition of the existing system first and provided brand new equipment, such as the AC units, exhaust fans grills, diffusers and louvers. We produced all the ductwork and installed according to the engineering requirements ensuring proper volume, backdraft, fire and motorized dampers operation. We provided all condensate and refrigerant piping and installed required thermostats and sensors with associated control wiring. By the end of the project, air test and balancing were carried out and certified report provided.

#142 | 2015
Jain Residence
Project Description

The project was completed at the highest client’s satisfaction by supply and installation of duct unit heater, exhaust fans, supply and return grilles, diffusers and louvers; fabrication and installation of ductworks with all associated equipment including fire and volume dampers. All required thermostats with associated wiring were installed by Denair HVAC NYC in accordance of project mechanical specification. We provided air balancing, certified report and shop and as-built drawings.

#141 | 2016
Flying Tiger
Project Description

Denair HVAC NYC fabricated and installed all new ductwork in accordance with project requirements. Supplied and installed all required dampers, flexible duct, sealants, fire wraps and duct insulation. All required drain line piping including tie-ins was provided from our end. Denair supplied and installed new HVAC units and exhaust fans.

#140 |
Jack Resnick & Sons
Project Description

This renovation project required relocation of FCU units and existing condensate and condenser water S7R piping. Denair HVAC, also, produced and installed new ductworks and volume dampers. Maintenance to existing FCU units was provided including vacuum clean and filter replacement. Air balance with certified report was done upon completion of the project.

#139 | 2016
18 Gramercy Park Apartments
Project Description

In this project we furnished and installed new AC units. Denair fabricated rectangular ductworks and installed according to the project specifications with all associated accessories. Air outlets and cable operated dampers were installed.

#138 | 2016
Papaya King
Project Description

The project started with the inspection of existing equipment. Denair HVAC NYC furnished and installed new AC units, make-up units, and exhaust fans. We produced new ductwork and installed the same together with associated accessories, including welded and outdoor ductworks. All relevant piping was provided from our end. Thermostats and control wiring, leak and smoke detectors were installed in accordance with the project requirement. Denair HVAC NYC performed air balancing and submitted certified report along with all shop and as-built drawings.

#137 | 2015
Macklowe Management
Project Description

The project was done in the shortest time and involved provision and installation of new VAV boxes, supply and return grills, diffusers; fabrication of new galvanneal ductwork and installation accordingly with all associated accessories; installation of cable operated and fire/smoke dampers; installation of thermostat and associated control wiring. Air balancing was performed and certified report provided.

#136 | 2015
Pratt Institute
Project Description

The mechanical part of the project involved removal and relocation of existing AC units, removal of associated piping and installation of new piping including refrigerant and condensing. Air balance was performed at the end of the project and certified report provided.

#135 | 2015
Cure Urgent Care
Project Description

The project involved fabrication and installation of new ductwork and motorized dampers with actuators and control wiring. Furthermore, Denair HVAC provided maintenance to existing AC units including change of filters and belts, clean coil and ensure the system is working properly.

#134 | 2016
Kenneth Cole
Project Description

Denair HVAC NYC  carried out inspection of the existing equipment and provided maintenance. We replaced a couple of AC units providing all necessary accessories. The project was done at the highest satisfaction of the customer.

#133 | 2013
Swatch
Project Description

Small HVAC work was done to reclaim Freon 22 from existing mechanical unit.

#130 | 2014
Cohen Brothers
Project Description

Two floors were renovated in the building. Denair carried out HVAC part of the project. We furnished and installed new exhaust fans, grilles and diffusers as well as relocated the existing grills. Fabricated new ductwork and installed with associated accessories and volume and cable operated dampers. According to the project specifications new thermostats, associated control wiring were installed. We carried out air test and balancing and submitted certified report together with mechanical shop and as-built drawings.

#128 | 2015
Moinian Group
Project Description

Moinian Group building was a small project, which involved the following HVAC works. As mechanical contractor, Denair HVAC NYC supplied and installed exhaust fans, ductwork and associated accessories, volume damper, thermostats and supporting control wiring. We performed air balancing and provided certified report as well as shop and as-built drawings.

#125 | 2015
Open Society Foundations
Project Description

The project involved demolition of the existing equipment and installation of new. As mechanical contractor Denair HVAC supplied and installed new air conditioning units, supply and return grills, diffusers and louvers as specified. Also, we produced and installed ductwork with associated accessories. Volume and fire dampers were installed. Piping was also provided from our end, including condenser water S&R piping and wet tap connections. Thermostats and associated control wiring as well as leak detectors were installed in accordance with the project specifications. Performed air balancing and provided certified report.

#122 | 2015
Pearson Professional Centers
Project Description

Three floors were renovated in the building. HVAC part of the renovation included: demolition of a part of the existing equipment, replacement of exhaust grills to new ones and connection them to existing ductworks, supply and installation of transfer grills and ceiling diffusers. Finally, we carried out air balancing and submitted certified report.

#121 | 2015
Thor Equities
Project Description

Small HVAC project on Washington street involved supply and installation of exhaust fan, louver and ductwork with back draft damper.

#119 | 2015
IMG 5th Floor Renovation
Project Description

Renovation of the 5th floor in IMG building required demolition as specified and installation of new exhaust fans, radiators, ductwork and volume and fire dampers. By the end of the project, Denair HVAC NYC carried out air test and balancing and submitted certified report.

#117 |
36 Gramercy Park East Apartments
Project Description

The residential project required installation of new air conditioning units, ductwork with associated accessories, cable operated damper. We provided all necessary mechanical piping, including chilled water S&R piping and condensate piping. Denair installed thermostats, wiring controls and drip pan with leak detector. The drawings, shop and as-built, were provided upon completion.

#116 | 2015
LIM College
Project Description

Lim College project required demolition of the existing equipment and installation of new: air conditioning units, electric reheat coils, exhaust fans, filter housings, etc. Ductwork was fabricated in our sheet metal shop in New York and installed with all associated accessories. Condensate piping and condenser water S&R piping was relocated. Thermostats, control wiring, detectors were installed as specified. Upon completion of the job, we carried out air balance and provided certified report along with mechanical shop drawings and as-built drawings.

#115 | 2015
Quad Cinema Renovations
Project Description

This large project was successfully completed by Denair HVAC NYC at the most satisfaction of the client. The mechanical works involved: provision and installation of air handling and condensing AC units, cabinet unit heaters, EBH, humidifiers, exhaust fans, supply fans. Having our own sheet metal shop we fabricated ductwork, and installed including outdoor ductwork, acoustic panels, duct silencers, volume, able operated, fire/smoke and motorized dampers. Denair HVAC provided all necessary piping, including hot water, refrigerant and condensate piping with condensate pump. Humidistats, humidity sensors, air pressure switches, thermostats, control wiring leak and smoke detectors were installed in accordance with the project specifications.

#114 | 2015
Medical Office 175 East 96th Street, New York, NY Service Contract
Project Description

This project was accomplished by Denair HVAC NYC in the shortest time. We furnished and installed two air curtains with door switches, exhaust fans, supply and returns grilles, diffusers as well as duct heaters, thermostats and drip pan with leak detectors. We also produced and installed stainless steel ductwork with all associated accessories and volume and draft back dampers. At the end of the project we performed system start-up and we kept the equipment under our maintenance for another year to make sure that HVAC system is working at peak performance efficiently.

#111 | 2015
Centurion Realty
Project Description

The project was accomplished in accordance with project drawing and specification. Denair furnished and installed ductwork, diffusers, grilles and dampers, provided mechanical installation of all piping including condensate line, submitted shop drawings and as-built drawings and carried out air balancing upon completion providing certified report.

#110 | 2015
Vibrant Media Inc.
Project Description

For this project, Denair HVAC NYC fabricated and assembled required ductworks with all associated accessories, supplied and congregated volume and motorized dampers as well exhaust fans, louvers, diffusers, supply and return grills. Air balancing and drawing were provided to the client in the end of the project.

#108 | 2015
Tuxedo Shop
Project Description

In the project, Denair HVAC NYC furnished and installed 5-ton AC units, exhaust fans, supply and return grills, and diffusers. We produced ductwork and assembled with associated accessories, including volume and motorized dampers. Furnished and installed actuators, thermostats and associated wiring.

#107 | 2015
Barry’s Boot camp
Project Description

HVAC part of this project involved: supply and installation of AC units, hot water coils, unit heater, exhaust fan, supply and return grilles, and louvers. Denair produced and assemble ductwork and access doors. Congregated thermostats and control wiring, leak and smoke detectors. We arranged insulation of the existing piping and rerouted existing ductwork. Finally, we performed air balancing providing certified report. All supporting documents as well as shop and as-built drawings were provided to the client.

#106 | 2015
Fox & Jane
Project Description

Denair HVAC NYC supplied and installed 24,000 BTU ductless split system providing refrigerant lines, condensate line with condensate pump and control wiring. We performed system start-up to ensure the equipment is working properly.

#105 | 2015
Isabella Geriatric Center, stage 2
Project Description

(kitchen room) In this project Denair HVAC NYC performed wall penetration, furnished and installed through inline exhaust fan, new ductwork with associated grills.

#104 | 2015
IMG 12th Floor Renovation
Project Description

This renovation project required demolition of a part of the existing equipment, relocation and installation of new equipment. Denair HAVC NYC arranged relocation of existing AC units, diffusers and thermostats. Provided new paintable ductwork with associated accessories, new volume dampers, new piping including refrigerant and condensate. Furnished and installed new thermostats control wiring. Upon completion, Denair carried out air balancing and provided certified report. Mechanical shop and as-built drawing were provided to the client.

#103 | 2015
New School – 8th Floor
Project Description

Denair HVAC NYC performed demolition of the existing equipment and installed new AC units, electric heater coils, VAV boxes, exhaust fans. We furnished and installed control valves and steam traps for existing radiators. Fabrication and installation of ductwork, including aluminum, was required with all associated accessories. We installed volume, cable operated, fire and motorized dampers. Provided new refrigerant and condensate piping and DDC controls. Finally we performed air test and balancing with certified report. Shop drawing together with as-built drawings were submitted to the client.

#102 | 2015
Isabella Geriatric Center, stage 1
Project Description

(bathroom) In this project, Denair HVAC NYC removed existing grills, fire dampers and ductworks. Fabricated and installed new ductworks with all associated accessories, grills and fire dampers.

#101 | 2015
Five Brothers Deli
Project Description

At this location, we supplied and installed 4-ton air conditioning unit, electric duct heater, exhaust fan, grilles, diffusers and louvers as specified. Fabricated and installed ductwork, branches and accessories. Furnished and installed dampers, piping including refrigerant and condensate as well thermostats and control wiring.

#100 | 2015
Reverence Capital Partners
Project Description

It was a small project to improve HVAC system of the building. We removed a part of existing duct and diffusers. Furnished and installed supply and return grills matching the existing. Fabricated and installed new ductwork to extend supply lines to new diffuser locations. Installed new diffusers and dampers as required by client. In the end, we performed air test and balancing providing certified report and submitted all shop and as-built drawings.

#99 | 2015
Flannery Residence
Project Description

This residential project required new ductwork tied into existing unit. We fabricated and installed the duct together with diffusers, grills and dampers, providing all necessary hangers, connectors and transitions. Finally, we performed air balancing providing certified report.

#98 | 2013
Sarine Technologies
Project Description

The project was successfully completed by: supply and installation of air conditioning unit, exhaust fans and VAV boxes. Denair HVAC NYC also fabricated and installed ductwork and insulation as specified. We installed volume, cable operated and fire dampers; provided CWS/CWR and condensate piping; furnished and installed thermostats, leak and smoke detectors. Finally, we carried out air test and balancing providing certified report. All shop and as-built drawings were submitted to the client.

#97 | 2015
303 East 83rd APARTMENTS
Project Description

In this residential building we supplied and installed ducted 4-tons split AC unit, providing the required ducts with associated grills and dampers. Furnished and installed refrigerant and condensate piping with condensate pump. We installed all necessary thermostats, detectors and control wiring. To finalize, we carried out system start-up to ensure the system is working at peak performance.

#92 | 2015
Pret A Manger
Project Description

Denair won the bid on this project by offering more efficient solution to the equipment required. Based on our value engineering approach and experience, we suggested alternative equipment, which reduced construction costs and energy consumption for the users. We supplied and installed heat pumps, duct units, exhaust hood, air curtains and exhaust fans. For this project we fabricated ductworks, including spiral and kitchen and successfully installed as well as volume, blade, back draft, fire/smoke, motorized and air economizer auto dampers. We arranged the installation of walk-in cooler and freezer. Provided new piping, including condensate and condenser water S&R piping. We installed all necessary thermostats, sensors, detectors and control wiring. In the end of the project, we carried out air test and balancing providing certified report and all supporting documents such as shop and as-built drawings.

#91 | 2015
Queens College Remsen
Project Description

The project required demolition of the existing equipment and installation of new. Denair HVAC NYC removed and reinstalled existing AC unit, removed and installed new exhaust fan, duct, including duct support and insulation. Removed and installed new curbs for mechanical units. Also, we changed refrigerant piping, installed control wiring. Denair provided inspection of the HVAC system, performed start-up and air balancing with certified report.

#88 |
Kay Jewelers
Project Description
#84 | 2015
Valley Stream
Project Description

During this project Denair HVAC NYC provided all necessary mechanical equipment and installed 5 ton condensing unit, 5 ton air handler, steam coil cut into supply air ductwork, ductwork connections, branches with grills, provided refrigeration piping and support as well as condensate drain piping, installed thermostats and drip pan with leak detector.

#83 | 2015
Dutch Ambassador’s Residence
Project Description

At the residence of Dutch Ambassador, Denair HVAC NYC furnished and installed Unit heater, return grills, thermostat and thermostat control wiring. We also installed ductwork fabricated from our end. Mechanical shop drawings and as-built drawing were submitted to the client.

#82 | 2015
Ben-Gurion University
Project Description

This was a small project, where Denair furnished and installed ceiling mounted exhaust fans and wall mounted transfer grills.

#81 | 2015
Katerina Fishkin
Project Description

Denair HVAC NYC was asked to install 3 indoor ductless AC units as well as 1 outdoor condenser unit. We provided all necessary piping and performed system start-up.

#80 | 2015
Cure Urgent Care
Project Description

This project was accomplished by Denair in the shortest time. We furnished and installed two air curtains with door switches, exhaust fans, supply and returns grilles, diffusers as well as duct heaters, thermostats and drip pan with leak detectors. We also produced and installed ductwork with all associated accessories and volume and draft back dampers. At the end of the project we performed system start-up and we kept the equipment under our maintenance for another year to make sure that HVAC system is working at peak performance efficiently.

#79 |
Merchant Cash & Capital – 6th Floor
Project Description

In this project, Denair HVAC NYC furnished and installed supply and return grills, diffusers as per client’s specification. We, also, fabricated galvanized ductwork and installed with all associated accessories including volume dampers. Air test and balancing was performed and the client was supplied with certified report and mechanical shop and as-built drawings.

#78 | 2015
Nike Factory Store
Project Description

Denair HVAC NYC carried out inspections of the existing equipment and provided the following scope of work: produced ductwork and installed with insulation required, furnished and installed exhaust fans, unit heaters, dampers, air outlets, baseboard heaters, roof exhaust and associated control wiring. The client was provided with all shop and as-built drawings.

#77 | 2015
Verifone
Project Description

Client requested mechanical contractor Denair HVAC NYC to provide value engineering to identify the most efficient equipment. Upon completion, suggestion have been made in regards to equipment and installation. The existing equipment was demolished. Denair HVAC installed make-up air handler unit, exhaust fans, grilles, diffusers and louvers. We also fabricated and installed ductwork, branches and accessories as well as volume, fire and motorized dampers. All required thermostats and wiring control were installed. Air balancing was carried out and certified report provided along with shop and as-built drawings.

#76 | 2015
SKECHERS
Project Description

Denair HVAC NYC furnished and installed air curtain unit, exhaust fans, diffuser, supply and return grills as per client’s specification. We fabricated and installed paintable ductworks, branches and accessories, volume, blade and fire dampers. We also installed thermostats, temperature and CO2 sensors and associated control wiring. We performed air balancing and provided certified report as well as shop and as-built drawings.

#75 | 2015
Smashburger, Bronx
Project Description

Having satisfied customer at previous Smashburger location, Denair HVAC NYC won another Smashburger project. In Bronx, we furnished and installed all required HVAC equipment including make-up unit, exhaust fan and exhaust hood, performed air test and balancing and provided certified report.

#74 | 2014
Smashburger, New York City
Project Description

At this location, Denair HVAC was asked to carry out inspection of the existing equipment including AC units, make up unit, kitchen fan, exhaust fans, refrigerant and condensate piping. After the inspection, we arranged demolition of the existing ductworks and installed new including flue ductwork, branches and accessories for water heater. Upon completion, we performed system start-up and air balancing with all supporting documentation.

#72 | 2014
Achievement First
Project Description

In this project general contractor requested the following HVAC works: furnish and install HVAC equipment, ductwork and all diffusers, registers and thermostats, provide condensate and refrigerant piping, disconnect existing unused unit and tie new lines for FCUs, furnish and install pump and funnel drain for drain lines, provide FCUs with integral drain pans and leak detectors. Upon completion, we carried out air test and balancing providing certified report.

#71 | 2014
Regus
Project Description

Denair HVAC performed demolition of existing ducts and grills, and installed brand new ductworks, supply and return grills and diffusers as well as volume and cable operated dampers. Air balancing was performed and associated certified report provided.

#69 | 2014
Canon
Project Description

Denair was requested to do existing equipment inspection. In consequence of inspection, existing diffusers and thermostats were relocated and maintained. VAV boxes were furnished and installed as well as supply and return grills, diffusers and new thermostats and volume/fire dampers. We performed air test and balancing. All the works were done in after office hours to keep the building fully operated.

#68 | 2014
Blush
Project Description

The project was accomplished by installing AC and ERV units as specified by client with all associated ductworks and accessories. Volume, cable operated and back draft dampers were installed. Refrigerant and condensate piping provided and installed as well as thermostats and leak detectors. We carried out air-balancing and provided certified report along with shop and as-built drawings.

#66 | 2014
Davidoff of Geneva
Project Description

The cigar shop required sophisticated HVAC system to keep the required temperature and humidity. Denair HVAC NYC researched the most sophisticated equipment suitable for this delicate project. Based on this we installed AC units, SHN-20 unit, humidifiers, duct heaters and air curtains. Also, new radiators were provided and installed as well exhaust fans, grilles, diffusers and registers. We fabricated ductwork and installed it with all associated accessories. Refrigerant and condensate piping was provided as well as pressure steam lines. All required thermostats, humidistats, leak and smoke detectors were furnished and installed. We performed air balancing and provided certified report.

#64 | 2014
T2 Tea
Project Description

This project required mechanical package of air conditioning unit, new steam radiators, exhaust fans. We produced and installed ductwork inside and outside and all associated accessories. Volume, fire and motorized dampers were installed. All necessary piping was provided from our end, including refrigerant, condensate and LP steam piping. Required thermostats, leak and smoke detectors were furnished and installed as per client’s specifications. Air balancing was performed and supporting report was provided as well as shop and as-built drawings.

#63 | 2014
Trustpilot US
Project Description

In this building the works were done in two floors 4th and 17th. Denair HVAC completed the project within the given time and budget. The job involved demolition of existing equipment and installation of AC units, duct heaters, exhaust fans. Inspection of existing radiators was carried out. Based on the inspection, the radiators were relocated. Denair HVAC NYC produced and installed ductwork, branches and accessories. Also, volume, fire, fire/smoke and motorized dampers were installed. All necessary piping was also provided by Denair, such as condensate piping and condenser water S&R piping. Thermostats and leak detectors were provided and installed. By the end of the project, air test and balancing was performed and certified report provided. Client also was provided with all associated shop and as-built drawings.

#62 | 2014
Desheli
Project Description

Denair HVAC NYC furnished and installed 500 CFM exhaust fan with associated ductwork, supply and return grilles, diffusers and registers. Furnished and installed volume, cable operated, back draft and fire dampers and performed air balancing providing associated certified report.

#61 | 2014
Crohn’s & Colitis Foundation of America
Project Description

This wasn’t a big HVAC project, which required installation of new radiators and relocation of the existing. The project was completed in shortest time with customer’s satisfaction.

#60 | 2014
146 Waverly Place Apartments
Project Description

This large project was successfully accomplished by Denair. It required installation of AC units, Energy Recovery Ventilator, exhaust and kitchen fans, humidifiers and all associated grill, diffusers and registers. Denair also fabricated and installed all necessary ductworks including supply, exhaust and kitchen and laundry exhaust ductwork. We provided all necessary piping and installed cable operated dampers, thermostats and leak detectors. We carried out air test and balancing and provided certified report.

#59 | 2014
Longacre House Apartments
Project Description

This project required Denair HVAC NYC to provide and install ducted 4-ton AC units, ducts with associated grills and dampers. We also provided condensate pump including associate piping as well as refrigerant piping. Furnished and installed all necessary leak detectors, thermostats and control wiring. In the end of the project, we carried out system start-up.

#58 | 2014
Aion Partners
Project Description

At this location, we arranged demolition required and installed VAV Boxes, exhaust fans, supply and return grills. Denair fabricated and installed ductwork, branches and accessories. Furnished and installed volume, fire and smoke dampers and thermostats. Denair performed air balancing and provided certified report.

#57 | 2014
9430 Ridge Blvd Apartments
Project Description

This project required Denair to install new indoor unit and outdoor condensate unit providing all necessary mechanical piping, control wiring and all proper coverings. By the end of the project, system start-up was performed.

#56 | 2014
OVANDO
Project Description

During this project Denair HVAC NYC arranged installation of FCU indoor unit as well as outdoor condenser unit and exhaust fans. We fabricated and installed exhaust ductwork and accessories as well as back draft damper. Furnished and installed condensate piping and condensate pump. Thermostats were installed and system start-up was carried out.

#55 | 2014
Apartments, Upper West Side
Project Description

This was a small project, which was completed in shortest time. Denair installed cooling and heating mini split AC unit, pad for condenser unit ground installation, provided all necessary piping and performed system start-up to ensure everything is working properly.

#54 | 2014
Chika Mexicana Restaurant, Brooklyn
Project Description

It was a small project, where Denair installed mini split AC units, bracket for condenser unit, condensate pump, and provided all necessary piping such as refrigerant and condensate. By the end, we performed system start-up.

#53 | 2014
Walgreens
Project Description

Furnish and install AC Units, exhaust fan, supply and return grills, diffusers as specified. Furnish and install inside and outside ductwork, branches and accessories as well as refrigerant, LPS and condensate piping. Furnish and install thermostats, sensors, leak & smoke detectors as specified. Install heater units. Performed air balancing and provided with certified report. Provide shop drawing and as-built drawings. Arranged demolition as required.

#52 | 2014
36 Gramercy Park East Apartments, Penthouse DE
Project Description

The project was successfully accomplished by installing AC units, exhaust fans, supply and return grills, diffusers and registers. Denair also fabricated and installed ductwork, branches and accessories. Furnished and installed insulation as required by client as well as cable operated dampers. We provided all necessary piping including CWS/CWR and condensate piping. Thermostats and leak detectors were installed as specified. Upon completion Denair performed air test and balancing and provided certified report.

#51 | 2014
London House
Project Description

In this project Denair HVAC NYC installed new mini split AC unit, provided all necessary refrigerant and condensate piping and electrical power and control wiring. Upon completion, performed system start-up.

#49 | 2015
Morningside Heights, Apartments
Project Description

During this project Denair HVAC NYC carried out inspection on the existing equipment, furnished and installed new 8 ton AC unit and connected it to the existing ductwork. We reconnected all existing wiring, provided refrigerant and condensate piping. Furnished and installed thermostat, temperature sensors, and control wiring. We performed air test and balancing providing certified report. System start-up was carried out upon the completion of the project.

#47 | 2013
Murray Hill
Project Description

Denair HVAC NYC accomplished the project on time and on budget. We furnished and installed air conditioning indoor and outdoor units, branch control box and provided all necessary refrigerant piping. Upon competition we performed system start-up and ensured the users are aware of efficient usage of the system.

#46 | 2014
MADEWELL
Project Description

Initially, the costs of the project were too high due to the equipment requested. However, Denair HVAC NYC performed value engineering and suggested the usage of another maker’s equipment. The costs went down significantly, but the project was completed on time. We provided all the necessary equipment as well as installed: AC units, HRU, duct heater, exhaust fans, supply and return grills, diffusers and louvers. Denair HVAC NYC  fabricated and installed oval ductworks as well as spiral ductworks and accessories. Furnished and installed volume, cable operated, fire/smoke and motorized dampers. Also, Denair HVAC NYC has provided refrigerant and condensate piping, installed thermostats, sensors and smoke detectors. Upon completion performed system start-up, air balancing providing certified report.

#45 | 2014
Art of Shaving
Project Description

Furnished and installed AC units, roof curbs and all required thermostats. Furnished and installed new ductwork with air outlets and insulations. Repaired existing ductwork including sealing and insulating. Furnished and installed fire dampers, grills, linears. Furnished and installed all required condensate piping, refrigerant piping and pipe insulation for a complete system as per specifications provided. Performed air test and balancing and provided certified report.

#44 | 2013
Dr. Hanna Dental Office
Project Description

Furnished and installed exhaust fans, ductwork branches, diffusers, louvers and thermostats. Furnished and installed dampers including volume, fire, back draft and motorized.

#43 | 2013
Sparkling Jewels
Project Description

As mechanical contractor Denair HVAC NYC furnished and installed air conditioning units, exhaust fans, CV boxes as well as grills, diffusers and registers. Furnished and installed ductwork, branches, insulation and volume & motorized dampers. Furnished and installed CWS/CWR and condensate piping. Furnished and installed thermostats, leak and smoke detectors. Performed air balancing as well as water balancing and provided certified reports. All shop and as-built drawing were provided to the client.

#42 | 2013
Sun Glass Hut
Project Description

Denair HVAC NYC furnished and installed new ductwork, branches and accessories. Inspected existing equipment and performed WSHP maintenance, shut off valve and thermostats relocation and linear diffusers cleaning. Performed air re-balancing.

#41 | 2013
Viola Chocolat
Project Description

Denair HVAC NYC performed demolition of the existing outside and inside ductwork, removed exhaust kitchen hood and installed new equipment as specified.

#40 | 2014
Star Rays
Project Description

Denair HVAC NYC furnished and installed A/C Units and CV box, supply and return grills, diffusers and registers. Furnished and installed ductwork, insulation and volume dampers. Furnished and installed condensate and CWR/CWS piping. Furnished and installed thermostats and leak detectors. Performed air balancing and provided certified report. Shop drawing as well as built-in drawing were provided to the client.

#39 | 2014
Five Star
Project Description

Denair HVAC NYC performed demolition of the existing equipment and installed new air conditioning units and air curtains. Furnished and installed new ductwork including volume dampers and insulation. Furnished and installed new air outlets and performed related balancing. Shop and as-built drawing were provided to the client.

#38 | 2014
It’s Sugar, New York City
Project Description

Denair HVAC NYC carried out AC units mechanical inspection and based on the inspection relocated existing registers and installed new grills, diffusers and registers. Furnished and installed new ductwork, branches, insulation and motorized dampers. Inspected and maintained existing thermostats and sensors. Performed air balancing and provided as-built drawings.

#37 | 2013
It’s Sugar, Brooklyn
Project Description

Furnished and installed AC units, air curtains, exhaust fans, supply and return grills, diffusers and registers. Furnished and installed ductwork, insulation, branches and volume dampers. Furnished and installed refrigerant and condensate lines as well as required thermostats and sensors. Performed air balancing and provided shop and as-built drawings.

#36 | 2013
Madvel
Project Description

Denair HVAC NYC prepared coordination, mechanical shop and as-built drawings. Furnished and installed air conditioning units, exhaust fans, supply and return grills, diffusers and registers. Furnished and installed sheet metal with insulation and lining, volume, fire/smoke and motorized dampers. Furnished and installed new steam radiators with associated piping and accessories. Furnished and installed CWS and CWR piping as well as insulated piping for HVAC system. Furnished and installed thermostats, sensors and smoke detectors. Performed system start-up and air balancing upon completion.

#35 | 2013
Carters Oshkosh Combo
Project Description

Denair performed relocation of the existing equipment as per specifications. Furnished and installed new ductwork, insulation, branches and accessories. Furnished and installed new supply & return grills, diffusers, registers and volume dampers. Performed air balancing with certified report and provided mechanical shop & as-built drawings.

#34 | 2013
Sarine Technologies
Project Description

Denair HVAC NYC furnished and installed A/C units as specified, exhaust fans, VAV boxes, supply and return grills, diffusers and registers. Furnished and installed ductwork, branches, insulation and accessories. Furnished and installed piping including CWS/CWR and condensate. Furnished and installed thermostats, leak and smoke detectors. Performed air balancing and provided certified report.

#33 | 2013
TUMI store
Project Description

Denair HVAC NYC furnished and installed supply and return grills, diffusers and registers. Furnished and installed ductwork, branches and accessories as well as insulation. Furnished and installed operated, volume and fire dampers. Performed air balancing and provided certified report. Performed maintenance of existing FCU and EDH.

#30 | 2013
Harris Publications
Project Description

Furnished and installed new HVAC equipment, ductwork, dampers, insulation, piping and thermostats as indicated on client’s plans. Provided coordination drawings, shop and as-built drawings. Performed air test and balancing and provided certified report. Performed system start-up.

#29 | 2013
Vince Columbus
Project Description

Denair HVAC NYC  provided disconnect and evacuation of the existing HVAC system, furnished and installed new A/C units, electric duct heaters, base board heaters, exhaust fans, dampers, piping, thermostat, sensors, smoke detectors and ensured the HVAC system is complete and working properly. Provided air test and balancing with certified report.

#28 | 2013
ABS Partners
Project Description

In this project we arranged HVAC system for IT Room. We furnished and installed all new equipment, such as AC units, exhaust fans, grills, diffusers and registers. We fabricated and installed ductwork, insulation, branches and accessories, furnished and installed volume, fire/smoke and motorized dampers. Denair also furnished and installed steam radiators and provided all associated piping. Furthermore, we provided CWS/CWR and condensate piping. All required thermostats, sensors, and smoke detectors were installed according to the plan. In the end, we performed system start-up and air balancing provided all relevant documentation and reports.

#27 | 2013
Riot Games
Project Description

Denair HVAC NYC carried out survey of the existing equipment and provided report. Modified piping for existing radiators and provided new control valves. Furnished and installed new AC units, exhaust fans, ductwork, piping, radiators, acoustic lining, air outlets, transfer duct, condensate pump and piping, fire/smoke dampers, leak detectors, control wiring and thermostats. Provided test and balancing, system start-up and fire stopping. Performed all welding / brazing work and coordinated tie-ins to building system.

#26 | 2013
36 Gramercy Park East Apartments
Project Description

Furnished and installed AC units, exhaust fans, grills, diffusers and registers. Furnished and installed ductwork, branches & accessories, as well as insulation and operated, back draft and zone dampers. Furnished and installed piping including CHWS/R and condensate. Furnished and installed thermostats and leak detectors. Performed air test and balancing and provided certified report. Shop and as-built drawing have been provided to the client.

#25 | 2013
Jewish Museum
Project Description

Denair HVAC NYC performed demolition of the existing system and furnished and installed new ductwork, branches and accessories. Furnished and installed new linear bar diffusers.

#24 | 2013
Dialysis Center
Project Description

Having won the project, we carried out inspection and suggested better solution for HVAC system. We furnished and installed RTU Units, supply and return grills, diffusers, dampers and thermostats. Furnished and installed ductwork, branches and accessories. Provided ductwork sketching and shop drawings. Performed system start-up and air balancing with certified report.

#23 |
Isaac Grammal
Project Description

Furnished and installed ductworks, branches and accessories. Install air handlers, exhaust fans, grills and diffusers. Provided ductwork sketching and mechanical shop drawings.

#22 |
Curty Residence
Project Description

We removed all existing equipment and furnished and installed new equipment including AC units, grills, diffusers and registers. Furnished and installed ductwork, branches, insulation and accessories. Furnished and installed refrigerant and condensate piping.

#21 | 2013
426 W 58th Street, Columbus Circle, Condominium
Project Description

Project was accomplished in timely manner. Denair furnished and installed new air conditioning units, exhaust fans, grills, diffusers and registers. Furnished and installed ductwork, insulation and damper (volume and cable operated). Furnished and installed piping: refrigerant and condensate. Performed air balancing and provided certified report.

#20 |
69 Murray Apartments
Project Description

Denair successfully completed the project in shortest time! We furnished and installed Indoor and Outdoor Units as per client’s specifications. Furnished and installed Branch Control Box and necessary refrigerant piping. Performed system start-up.

#19 |
GAP – Lincoln Square, NYC
Project Description

Arranged relocation as per client’s specifications. Furnished and installed supply and return grills, diffusers and registers as specified. Furnished and installed ductwork, branches and accessories as well as insulation. Performed air and water balancing and provided certified reports. Mechanical shop and as-built drawing have been provided.

#17 |
Grand Central Plaza
Project Description

Removed existing ductwork, branches, grills and registers and installed new as per client’s specifications. F/I volume dampers, temperature controls, gills, registers and VAV boxes. Mechanical shop and as-built drawing have been provided. Performed air balancing with certified report. Carried out control inspection.

#16 |
Dolce & Gabbana
Project Description

F/I exhaust fans as specified or approved equal. F/I linear diffusers as specified or approved equal. F/I ductwork, branches and accessories. F/I insulation as specified. F/I cable operated, fire/smoke and back draft dampers. F/I refrigerant piping. F/I thermostats. F/I smoke detectors as specified. Perform air balancing and provide with certified report. Provide shop and build as drawing. Demolition as specified. Existing thermostats relocation as specified.

#15 |
HAP Investments
Project Description

Denair HVAC NYC removed performed demolition of the existing equipment, inspected the site and carried out value engineering research. Based on the research, several suggestions were made regarding the equipment. After consideration, client decided to proceed with the alternative equipment suggested by Denair. Furnished and installed exhaust fans, VAV boxes, grills, diffusers, and registers; ductwork, branches and accessories as well as insulation. Furnished and installed fire damper, thermostats. Performed air test and balancing and provided certified report. Also, shop and as-built drawings were provided.

#14 |
Lennox Hill
Project Description

Having won this project Denair HVAC NYC carried out value engineering and found more efficient equipment, which reduced costs and improved efficiency of operation. Furnished and installed AC units, exhaust fans, ductwork, branches and accessories as well as insulation. Furnished and installed supply and return grills, diffusers and registered. Furnished and installed volume, fire/smoke and motorized dampers. Furnished and installed refrigerant and condensate piping. Provided shop drawings and as-built drawings. Performed air test and balancing and provided certified report.

#13 |
36 Gramercy Park East Apartments
Project Description

Furnished and installed air conditioning equipment with associated controls, piping and wiring. Remove existing ductwork and furnished and installed new ductwork including volume, cable operated and zone dampers, insulation and related access doors as specified. Furnished and installed refrigerant piping and air outlets and provided related balancing. Provided also control wiring termination.

#12 |
Kaplan International
Project Description

Denair HVAC NYC furnish and install AC unit as specified or approved equal. Furnish and install new exhaust fans as specified. Furnish and install new ductwork as specified. Furnish and install new duct heaters as specified. Furnish and install new supply and return grills as specified. Furnish and install louver as specified. Furnish and install volume, motorized and fire dampers as specified. Furnish and install refrigerant line as specified. Furnish and install condensate line as specified. Perform start-up system. Perform air balancing and provide with certified report. Provide with shop/as-build drawings.

#11 |
Blink fitness
Project Description

Furnish and install Mitsubishi AC unit as specified. Perform Preventive Maintenance for existing RTU. Furnish and install exhaust fans with associated accessories as specified. Furnish and install ductwork, branches and accessories. Furnish and install flue ductwork as specified. Furnish and install ductwork and piping insulation as specified. Furnish and Install supply and return grills and diffusers as specified. Furnish and install volume dampers. Furnish and install thermostats and sensors as specified. Furnish and install smoke detectors. Furnish and install refrigeration and condensate piping. Provide with Shop/as-build drawings. Perform Systems start up. Perform air balancing and provide with certified report.

#10 |
1001 6th Avenue 10th floor
Project Description
#9 |
HSBC Bank, Flushing
Project Description

Removed existing ductwork and installed new ductwork, branches and accessories. Furnished and installed supply & return grills and diffusers as well as volume & opposed dampers. Furnished and installed ECH, thermostats and sensors. Furnished and installed R=6.3 ductwork insulation. Provided drawings – shop and as-built. Performed air test and balancing and provided certifies report.

#8 |
Avon, New York City
Project Description

Performed demolition of existing equipment. Furnished and installed air conditioning units, exhaust fans and EDH as per client’s specifications. Furnished and installed ductworks, branches and accessories. Furnished and installed supply & return grill and louvers. Furnished and installed volume, fire, back draft and motorized dampers. Furnished and installed refrigerant and condensate lines. Performed system start-up and air test and balancing providing certified report.

#5 |
HSBC Bank, Brooklyn
Project Description

Furnished and installed ductwork, branches and accessories. Furnished and installed supply & return grilles, registers and volume dampers. Performed HVAC system start-up and air balancing providing certified report.

#3 |
Chalopin Studio
Project Description

Demolished existing equipment. Furnished and installed AC units, exhaust fans and humidifiers as per client’s specifications. Furnished and installed ductwork, branches and accessories as well as supply and return diffusers, louvers and registers. Furnished and installed thermostats, sensors, and condensate and refrigerant lines. Performed start-up and air-balancing.

#2 |
DEALS
Project Description

Furnished and installed air conditioning unit, exhaust fans, ductwork, grilles, dampers, temperature and CO2 sensors. Performed system start-up and air-balancing. Provided shop and as-built drawings.

#1 |
Balenciaga
Project Description

Removed existing equipment and furnished and installed new air conditioning equipment, including exhaust fans, AC units, condensing units, ductless units, etc. Furnished and installed distribution and return ductwork, acoustical duct lining and ductwork insulation. Furnished and installed digital 7-day programmable thermostats and associated control wiring.

#2 |
VALLEY NATIONAL BANK
Project Description

As a mechanical contractor Denair HVAC NYC furnish and install HVAC System. Furnish and install exhaust fans. Furnish and install all duct work. Furnish and install new registers and diffusers. Furnish and install Thermostats and controls. Furnish and install electric heaters.

# |
PROJECTS
Project Description

HVAC company NY

DenAir is a HVAC company NY has a long experience in the supply, installation and commissioning of HVAC systems services (heating, ventilation and air conditioning).

We perform work of any complexity. And our HVAC company NY is always searching for the most efficient solutions for our clients in order to help them save their investments. You will spend with us is much less due to: reduced cost of the work with loyalty program, , guaranteed quality spare parts, consistently high level of service and thus no time and money lost for premature repairs. In this section you can find all our HVAC company New York. The list of our major facilities, as well as a list of new buildings of the city of New York, where we have accomplished the works on installation of air conditioning systems.

Here you can find examples of work of our HVAC company NY in commercial premises, residential buildings and industrial buildings.

Our HVAC company NY offers turnkey HVAC solutions that ensure the ultimate energy efficiency and meet the most stringent demands.

Very important is the role of good conditioning in gyms and fitness centers. In case of any problems in the ventilation system this kind of business immediately faces losses reputational or even worse- directly financial, as people cannot physically work out in the stuffiness. We made sure that this will never happen with our customers from Manhattan fitness center.

Special pride of our HVAC company NY are the projects in the medical and educational institutions, where there are particularly stringent requirements to air quality and installation standards.

All in all since the beginning of our work in New York our HVAC company NY has implemented hundreds of projects of complex HVAC solutions. Since numerous projects completed are presented in the section we tried to make the navigation as easy as possible for your convenience by regrouping projects by the purpose and on the map. Have a look at the projects of our HVAC company NY!

TESTIMONIALS

Dennis does excellent work; and, when his people are finished with a job, you can eat off the floor in the Mechanical room.  His team will be able to address any problem you have with commercial HVAC system.

Willian G. Holy

They have the best Engineering Service I have ever seen; they are always available on request and perform the maintenance in the most efficient way. Great Service.

Amanda Ron

I was able to upgrade my cooling towers through the help of Denair and I did love their Service rendered, Wonderful Experience.

Ken Lucky

Value Focused HVAC Provider

I recently used Denair for some repairs to my small two-story office building, and I have to say they are the most honest, hard-working and value focused HVAC provider I have ever experienced! Not only was the price competitive, but more importantly they helped reduce my energy costs from an inefficient system I had replaced 10 years ago. Denair delivers customer-focused service, valuable recommendations to improve HVAC efficiency, great quality work, all at very competitive prices while ensuring customer satisfaction. Highly recommended!

John Green

Reliable, ethical, professional
Dennis was always available when I called on him. Never was any additional work generated on any quote/contract awarded. Reliable, expert and a pleasure to work with. A real value!

Al Neese RAM-ARM

EMERGENCY SERVICE FORM