ConEd & NYSERDA Incentive Programs

Reduce HVAC Upgrade Costs With Utility Incentives

NYC commercial buildings can recover 20–50% of HVAC project costs through ConEd and NYSERDA programs — without navigating the application process alone. Denair manages it all.

Schedule a Free Assessment (212) 776-1333
Program Performance · NYC Commercial
30%
Avg. energy cost reduction via automation upgrades
50%
Project costs offset through incentive stacking
19
Years serving NYC commercial HVAC
5
Boroughs — Brooklyn, Manhattan, Queens, Bronx, SI
Inc. 5000 recognized. Factory-certified across AAON, Trane, Carrier, LG, Mitsubishi, and more.
ConEd Registered Trade Ally
NYSERDA Program Partner
LL97 Compliance Specialists
End-to-End Application Management
24/7 Emergency Response
All Five NYC Boroughs
Factory-Certified Technicians
Inc. 5000 Recognized

Your HVAC Upgrade Should Pay for Itself

Most NYC facility managers leave significant utility money on the table — not because they're unaware of ConEd and NYSERDA programs, but because navigating the requirements, documentation, and verification steps while managing day-to-day operations is a full-time job in itself.

Denair handles the entire incentive process: site assessment, application preparation, equipment specification, installation, and post-project verification. You see the savings. We handle the complexity.

Every project is scoped to maximize available incentives across multiple programs — and aligned with your LL97 compliance roadmap so the same investment counts toward both goals.

What We Handle For You
  • Pre-project energy audit and baseline documentation
  • ConEd and NYSERDA program eligibility screening
  • Application preparation and submission
  • Equipment specification to meet program requirements
  • Turnkey installation by factory-certified technicians
  • Post-installation M&V (measurement and verification)
  • LL97 compliance alignment documentation
  • Incentive check coordination and disbursement tracking
Available Programs

NYC Commercial HVAC Incentive Programs

Denair identifies and stacks multiple funding sources to maximize your project return across ConEd, NYSERDA, and federal programs.

ConEd Program

Commercial & Industrial Energy Efficiency

Per-unit incentives for verified energy savings from HVAC upgrades including high-efficiency chillers, RTUs, VRF systems, BAS/BMS controls, and variable frequency drives. No cap on incentive dollars for large projects.

Typical Offset
20–40%
NYSERDA Program

Clean Heat & Heat Pump Incentives

Incentives for transitioning from fossil-fuel-based HVAC to high-efficiency heat pump and VRF systems. Supports LL97 carbon reduction goals and qualifies for stacking with ConEd program dollars.

Typical Offset
25–50%
NYSERDA FlexTech

Energy Study & Feasibility Support

Cost-sharing for comprehensive energy studies, BAS/BMS feasibility assessments, and HVAC system optimization studies. Provides the roadmap for upgrade projects and reduces upfront planning costs.

Study Cost Offset
Up to 50%
Federal Program

IRA Commercial Energy Tax Credits

The Inflation Reduction Act's 179D deduction and Section 48C tax credits provide substantial federal incentives for energy-efficient commercial building improvements. Denair coordinates with your tax team to identify applicable credits.

Tax Deduction Per Sq. Ft.
Up to $5.00
ConEd Program

Demand Management & Peak Reduction

Incentives for installing controls, smart thermostats, and BAS upgrades that enable demand response — reducing peak load and qualifying for ongoing monthly incentive payments in addition to one-time installation rebates.

Ongoing Monthly Credit
Available
Stacking Strategy

Multi-Program Incentive Stacking

Most projects qualify for incentives from multiple programs simultaneously. Denair maps every eligible funding source before project start — combining ConEd, NYSERDA, and federal programs to maximize your total return.

Combined Project Offset
30–60%
Our Process

From Assessment to Incentive Check — We Handle It

A structured, facility-manager-friendly process built to minimize disruption and maximize program returns.

01

Site Assessment

We evaluate your existing HVAC systems, energy spend, and carbon profile — no cost, no obligation.

02

Program Matching

We identify every ConEd, NYSERDA, and federal program your project qualifies for and build a stacked incentive plan.

03

Application & Approval

Denair prepares and submits all documentation. You review, sign, and we manage follow-up with the utility.

04

Installation & Verification

Factory-certified installation, post-project M&V, and final incentive disbursement — all coordinated by Denair.

Eligible Equipment

HVAC Upgrades That Qualify for Incentives

Incentive-eligible projects span the full range of commercial HVAC — from controls and automation to full mechanical replacements.

01

VRF / VRV Heat Pump Systems

LG, Mitsubishi, Fujitsu, Samsung — factory-certified installation with NYSERDA Clean Heat incentives.

02

Building Automation Systems (BAS/BMS)

75F and Honeywell controls — qualifies for ConEd demand management and NYSERDA FlexTech programs.

03

High-Efficiency RTUs & Chillers

AAON, Trane, Carrier, Daikin — incentives based on efficiency tier and verified energy savings.

04

Variable Frequency Drives (VFDs)

ABB and Yaskawa VFDs — per-kWh incentives for fan and pump motor upgrades across all five boroughs.

05

Air & Water Test & Balance (TAB)

System commissioning and TAB services that establish program baselines and improve measured savings verification.

06

Computer Room & Server Cooling

Stulz and Liebert precision cooling — eligible for ConEd data center efficiency incentives.

LL97 & Incentives — Aligned

One Project. Two Goals.

The most cost-effective LL97 compliance path runs straight through ConEd and NYSERDA incentive programs. Upgrading to high-efficiency or electrified HVAC simultaneously reduces your carbon intensity and your capital outlay — with utility funds offsetting what LL97 compliance would otherwise cost in fines.

See how Denair aligns both
$268M+
ConEd incentives distributed to commercial buildings in NYC (annual)
$2,000+
Per-ton incentive available for high-efficiency chiller replacements
30%
Average energy cost reduction Denair delivers through HVAC upgrades
19 yrs
Denair serving NYC commercial facility managers
Why Denair HVAC

The Partner That Stays In It With You

Most HVAC contractors hand you a completed job and disappear. Denair is structured around the full lifecycle — from incentive applications through emergency response — because commercial facility management never stops.

Talk to a Denair Engineer

Factory Certifications Across All Major Brands

Certified to install and service AAON, Trane, Carrier, Daikin, LG, Mitsubishi, Fujitsu, Samsung, Stulz, Liebert, 75F, Honeywell, ABB, and Yaskawa — ensuring installed equipment meets program specs from day one.

LL97 Compliance Built Into Every Project

We don't treat incentive projects and compliance projects as separate engagements. Every HVAC upgrade is scoped with your LL97 carbon targets in view, so you're not doubling back on the same systems twice.

Single Point of Contact — No Runaround

One dedicated project manager handles your assessment, application, installation coordination, and post-project verification. You're not managing the utility relationship. We are.

24/7 Emergency Response — All Five Boroughs

Incentive programs reward the upgrade. Emergency response protects the investment. Denair technicians are available around the clock across Brooklyn, Manhattan, Queens, the Bronx, and Staten Island.

Local Law 97

LL97 Fines Begin. Incentives Offset the Upgrade.

NYC buildings over 25,000 sq ft face escalating carbon penalties under Local Law 97. The most cost-effective compliance path combines HVAC electrification and efficiency upgrades — funded in part by the same ConEd and NYSERDA programs Denair manages for you.

Get a Free LL97 Assessment
FAQ

Common Questions

Questions about ConEd and NYSERDA programs from NYC facility managers — answered directly.

Call us: (212) 776-1333
What is the ConEd Commercial & Industrial Energy Efficiency Program?
ConEd's Commercial & Industrial Energy Efficiency Program provides incentives to NYC commercial building owners and operators who upgrade to more energy-efficient HVAC equipment and controls. Eligible upgrades include high-efficiency chillers, VRF systems, BAS/BMS automation, variable frequency drives (VFDs), and more. Incentives are paid per unit of energy saved, often offsetting 20–50% of project costs.
Does the ConEd incentive program help with LL97 compliance?
Yes. Many of the HVAC upgrades that qualify for ConEd and NYSERDA incentives — such as high-efficiency mechanical systems, building automation, and demand management controls — directly reduce your building's carbon emissions and support LL97 compliance. Denair HVAC integrates compliance planning into every incentive project so your investment works toward both goals simultaneously.
What HVAC upgrades qualify for NYSERDA incentives in NYC?
NYSERDA's Clean Heat and FlexTech programs support a wide range of commercial HVAC improvements including VRF/heat pump systems, high-efficiency RTUs, Building Automation Systems (BAS/BMS), and energy audits. Eligibility depends on the technology, baseline conditions, and projected energy savings. Denair's team manages the application process end-to-end and identifies which programs your project qualifies for before work begins.
How does Denair help us apply for incentive funding?
Denair manages the entire incentive process: we conduct the pre-project assessment, identify all eligible programs, prepare and submit applications on your behalf, ensure installed equipment meets program specifications, and coordinate post-installation verification. Our facility managers receive a single point of contact throughout — no navigating utility paperwork on your own.
How quickly can we access ConEd or NYSERDA incentives?
Timeline depends on the specific program and project scope, but most commercial projects receive initial approval within 4–8 weeks of application. Incentive funds are typically disbursed after installation and verification are complete. Denair works to identify fast-track opportunities and pre-approvals where available, especially for projects with tight capital improvement timelines.
Can smaller NYC commercial buildings access these incentive programs?
Yes. While LL97 applies specifically to buildings over 25,000 sq ft, ConEd and NYSERDA incentive programs are available to commercial properties of varying sizes across all five NYC boroughs. Eligibility is based on utility account type and the projected energy savings from the proposed upgrade — not building square footage. Denair serves commercial clients from retail and office to large mixed-use and residential towers.
Get Started

See What Incentive Dollars Are Available for Your Building

A free assessment from Denair identifies every ConEd and NYSERDA program your building qualifies for — and maps the fastest path to savings and LL97 compliance.

Schedule a Free Assessment or call (212) 776-1333
Get in Touch

Let's Talk About
Your Building.

Whether you're navigating LL97 compliance, planning a capital improvement project, or dealing with a system that can't wait — our team is ready to respond.

  • 24/7 emergency response across all five NYC boroughs
  • LL97 compliance expertise built into every engagement
  • 10+ years partnering with NYC facility managers
  • Proven 30% average reduction in energy costs
Or call us directly: (212) 776-1333