#147 / 2016
LARSSON & JENNINGS
333 Bleecker Street, New York, NY, United States
Denair executed the full scope of mechanical work in this project, which involved: supplying and installation of ducted ceiling concealed and wall mounted AC units of 18,000 BTU each; fabrication and installation of supply and return ductwork; supply and installation of supply and return floor mounted diffusers with associated plenum boxes; supply and installation of drip pans with leak detectors, refrigerant and condensate piping, condensate pumps and thermostats with associated control wiring. The project was completed by Denair HVAC NYC in according to schedule.
100 William Str. 17th Fl.
100 William Street, New York, NY, United States
#143 / 2016
117 East 57th Street, Brooklyn, New York, NY, United States
Denair carried out the HVAC part of this sizable project. Denair performed demolition of the existing system first and provided brand new equipment, such as the AC units, exhaust fans grills, diffusers and louvers. We produced all the ductwork and installed according to the engineering requirements ensuring proper volume, backdraft, fire and motorized dampers operation. We provided all condensate and refrigerant piping and installed required thermostats and sensors with associated control wiring. By the end of the project, air test and balancing were carried out and certified report provided.
#142 / 2015
21 East 96th Street, Brooklyn, New York, NY, United States
The project was completed at the highest client’s satisfaction by supply and installation of duct unit heater, exhaust fans, supply and return grilles, diffusers and louvers; fabrication and installation of ductworks with all associated equipment including fire and volume dampers. All required thermostats with associated wiring were installed by Denair HVAC NYC in accordance of project mechanical specification. We provided air balancing, certified report and shop and as-built drawings.
#141 / 2016
1281 3rd Ave, New York, NY, United States
Denair HVAC NYC fabricated and installed all new ductwork in accordance with project requirements. Supplied and installed all required dampers, flexible duct, sealants, fire wraps and duct insulation. All required drain line piping including tie-ins was provided from our end. Denair supplied and installed new HVAC units and exhaust fans.
Jack Resnick & Sons
880 3rd Ave, New York, NY, United States
This renovation project required relocation of FCU units and existing condensate and condenser water S7R piping. Denair HVAC, also, produced and installed new ductworks and volume dampers. Maintenance to existing FCU units was provided including vacuum clean and filter replacement. Air balance with certified report was done upon completion of the project.
#139 / 2016
18 Gramercy Park Apartments
18 Gramercy Park South, New York, NY, United States
In this project we furnished and installed new AC units. Denair fabricated rectangular ductworks and installed according to the project specifications with all associated accessories. Air outlets and cable operated dampers were installed.
#138 / 2016
6 Flatbush Ave, Brooklyn, NY, United States
The project started with the inspection of existing equipment. Denair HVAC NYC furnished and installed new AC units, make-up units, and exhaust fans. We produced new ductwork and installed the same together with associated accessories, including welded and outdoor ductworks. All relevant piping was provided from our end. Thermostats and control wiring, leak and smoke detectors were installed in accordance with the project requirement. Denair HVAC NYC performed air balancing and submitted certified report along with all shop and as-built drawings.
#137 / 2015
156 William Street, New York, NY, United States
The project was done in the shortest time and involved provision and installation of new VAV boxes, supply and return grills, diffusers; fabrication of new galvanneal ductwork and installation accordingly with all associated accessories; installation of cable operated and fire/smoke dampers; installation of thermostat and associated control wiring. Air balancing was performed and certified report provided.
#136 / 2015
395 Dekalb Avenue, Brooklyn, NY, United States
The mechanical part of the project involved removal and relocation of existing AC units, removal of associated piping and installation of new piping including refrigerant and condensing. Air balance was performed at the end of the project and certified report provided.
#135 / 2015
Cure Urgent Care
2689 Broadway, Brooklyn, NY, United States
The project involved fabrication and installation of new ductwork and motorized dampers with actuators and control wiring. Furthermore, Denair HVAC provided maintenance to existing AC units including change of filters and belts, clean coil and ensure the system is working properly.
#134 / 2016
601-603 West 50th Street, New York, United States
Denair HVAC NYC carried out inspection of the existing equipment and provided maintenance. We replaced a couple of AC units providing all necessary accessories. The project was done at the highest satisfaction of the customer.
#133 / 2013
640 Broadway, New York, United States
Small HVAC work was done to reclaim Freon 22 from existing mechanical unit.
#130 / 2014
475 Park Avenue, New York, NY, United States
Two floors were renovated in the building. Denair carried out HVAC part of the project. We furnished and installed new exhaust fans, grilles and diffusers as well as relocated the existing grills. Fabricated new ductwork and installed with associated accessories and volume and cable operated dampers. According to the project specifications new thermostats, associated control wiring were installed. We carried out air test and balancing and submitted certified report together with mechanical shop and as-built drawings.
#128 / 2015
545 5th Ave, New York City, NY, United States
Moinian Group building was a small project, which involved the following HVAC works. As mechanical contractor, Denair HVAC NYC supplied and installed exhaust fans, ductwork and associated accessories, volume damper, thermostats and supporting control wiring. We performed air balancing and provided certified report as well as shop and as-built drawings.
#125 / 2015
Open Society Foundations
224 West 57th Street, New York, NY, United States
The project involved demolition of the existing equipment and installation of new. As mechanical contractor Denair HVAC supplied and installed new air conditioning units, supply and return grills, diffusers and louvers as specified. Also, we produced and installed ductwork with associated accessories. Volume and fire dampers were installed. Piping was also provided from our end, including condenser water S&R piping and wet tap connections. Thermostats and associated control wiring as well as leak detectors were installed in accordance with the project specifications. Performed air balancing and provided certified report.
#122 / 2015
Pearson Professional Centers
100 William Street, New York, United States
Three floors were renovated in the building. HVAC part of the renovation included: demolition of a part of the existing equipment, replacement of exhaust grills to new ones and connection them to existing ductworks, supply and installation of transfer grills and ceiling diffusers. Finally, we carried out air balancing and submitted certified report.
#121 / 2015
875 Washington Street, New York, United States
Small HVAC project on Washington street involved supply and installation of exhaust fan, louver and ductwork with back draft damper.
#119 / 2015
IMG 5th Floor Renovation
304 Park Avenue South, New York, NY, United States
Renovation of the 5th floor in IMG building required demolition as specified and installation of new exhaust fans, radiators, ductwork and volume and fire dampers. By the end of the project, Denair HVAC NYC carried out air test and balancing and submitted certified report.
36 Gramercy Park East Apartments
36 Gramercy Park East, New York, NY, United States
The residential project required installation of new air conditioning units, ductwork with associated accessories, cable operated damper. We provided all necessary mechanical piping, including chilled water S&R piping and condensate piping. Denair installed thermostats, wiring controls and drip pan with leak detector. The drawings, shop and as-built, were provided upon completion.